01 April 2007

Tradition...?

Sleep in and miss church the second weekend of spring break (even if it's Palm Sunday)?

Check.

(Damn!)

31 March 2007

Spring Break!

Here's everything you could possibly want to know about my spring break, which is drawing to a close. I'm sorry if this ends up being a really long, self-indulgent, overly-detailed account of the past week. But hey, what's not to like - the list is ALPHABETIZED!

- BENNY and Joon. I watched this movie early in the week, probably Tuesday. I had intended to view it earlier in the semester with a couple of friends after a Contra Dance, but we only had a VHS copy on hand at the time, and couldn't find an open lounge with VHS capabilities. However, Linden (my roommate) has the DVD. It was interesting. I'm still not entirely clear on why 'Joon' is spelled the way it is. I know that Sam (Johnny Depp's character) isn't good at reading and writing, but we the spelling wasn't mentioned in the film (though the spelling of 'Benny' was). Hm.
- CLEAN room. Finally. Sort of. Mostly, anyway. I should still vaccuum and recycle some bottles, but it looks waaay better than it did during midterms.
- ELYRIA. Liz didn't leave for break until Monday, so on Sunday (after church) we took the Lorain County Transit to the mall in Elyria. I bought some suspenders for my Drag Ball costume (I'm going to be a newsie), and Liz contemplated some hair dye. We ate in the food court, and I discovered (due to my non-meat Lenten discipline) that being a vegetarian leaves one with few options in a food court. Then, we went to Michael's and Jo-Ann's, where I looked for royal blue Wool-Ease so I could make a hat (which will be mentioned later) using the same brand of yarn in for the multiple colors involved. I didn't find what I wanted, so I settled for some gray Red Heart yarn, deciding to make the hat in a lower-quality yarn. This means:
- As of Sunday, my successful yarn diet came to an end (after four months!).
- FOOD! I ate at the Agave Burrito Bar a couple of times, dousing my burritos with cayenne pepper. I also purchased food from IGA, and spent too much money on the good green beans and the good orange juice. I had some delicious cereal, and scrambled eggs. Later, some cous cous with peanut sauce. I still have a potato, carrots and canned fruit. The food I ate was pretty healthy, overall. There's just so much! The culprit: My sleep schedule was so off that sometimes I only ended up eating two meals a day. (It seems ridiculous to eat dinner when lunch was at 10pm.)
- HARRY Potter. Several subitems here.
1. I listened to MuggleCast quite a bit. (It's a podcast talk show run by the folks at Mugglenet, a leading fan-based HP website.) Provoked much thought regarding book 7, and film 5.
2. The cover art for Harry Potter and the Deathly Hallows has been released.
3. I watched the Prisoner of Azkaban (which I have determined to be my favorite of the movies thus far) and Goblet of Fire. While knitting hats, of course.
4. I have started rereading the Order of the Phoenix again, which I tried to start back in August, but was distracted by schoolwork. If hope to reread at least books 5 and 6, if not all of them, before the release of 7.
5. I Ravenclaw scarf may be in the works. It would probably be more along the lines of the PoA scarves, though I'm not sure.
6. In the third and fourth movies, I noticed Draco's cold weather hat choice. It looks like they put a cossack on top of a black baseball cap. Really. It doesn't cover his ears, and in one scene, if you pause it, you can see some of the cap's black fabric underneath the fur. I don't think hats like this really exist. I think the costume people are making it up.
- KOFI Annan. So I have this one class that has about 200 pages of reading/week, at least, and my professor told us to get this book about Kofi Annan (former SG of the UN), and to read it because it's interesting. I read the intro and Chapter 1. So much progress!
- LORAIN County Clerk Center. I applied for this really awesome program to study Russian language in St. Petersburg this summer, so I applied for a passport. This really nice guy from church, Marty Buck, gave me a ride.
- MIA Knuck. I knit up a pair of these fingerless mitts earlier this year, and painted an X Files theme on them. The knuckles read 'trustno1', but more recently, it says only 'tno1'. I can't find the right one. Also, Ben Franklin is out of the yarn I used to make it, as am I. It's been missing for a while now, but I did my laundry this week, and didn't find it amongst clothes. I'm starting to lose hope.
- PARCEL. On Tuesday, I got a nifty package from my parents. Contents included some chocolate, music, and little Eastery basket things. My mom even wrapped everything in pastel-colored tissue paper! The best part:
- RUSSIAN children's book. My mom got me a book from the Red Balloon Bookshop (this really great children's bookstore in MN), called 'First Thousand Words in Russian', and it has an online pronunciation guide. Russian vocabulary through direct object association! How great is that? (Answer: really great.)
- SHIRT. I've been knitting this shirt since summer, and I finally finished the front this week. Last Saturday, a few of us watched Pleasantville, and I began working on the back. Which I'm about 1/3 of the way through now. It should actually be done soon, maybe. Probably before those socks I'm (still) working on.
- STAR Wars hat. Specifically R2D2. It turned out really well, for my second attempt at Fair Isle (multicolor knitting technique). It didn't pucker at all, and only looks funny around the parts where I was trying to knit little circles of color in the round. The best part is, the awesomeness of the fact that I'm wearing R2D2 on my head overpowers any small flaws.
- TEENAGE Mutant Ninja Turtles. I had never seen the first movie all the way through, so I watched it early on in the week. Then I decided to make up a knitted version of a crochet pattern I found on Craftster last week for a TMNT hat. I made a Michelangelo hat, since he's sort of my favorite (though I'm quite partial to Rafael, too). (Photos in pattern post.)
- WAVE hat. Oddly enough, the pattern is named Cowabunga and it has nothing to do with the preceding item. Go figure. I'd attempted to make this last fall, but it turned out really bad. (Probably my worst project.) It used Fair Isle (see STAR Wars for more info), but it puckered a lot and looked really bad. The brim was kind of out of control, and it was really big. The instructions say to cast on 132 stitches, which is way too many. I also failed miserably at the Fair Isle part, since I was using 8 double pointed needle, in absence of an appopriately-sized circular needle. This week, I undid the failure hat and reknit it using fewer stitches and a circular needle, and came out with something much, much better. Behold the before and after shots.

- WHERE the sidewalk ends. No, I didn't read Shel Silverstein poetry, but I did go for a walk. For those of you who know the geography of Oberlin, I walked along West Lorain street, which passes Wilder and Hales. I walked all the way to Sacred Heart (the Catholic church), where the sidewalk on the north side of the street stopped. It was quite enjoyable. The Student Health Center has the weirdest architecture. I really must go on more walks in the future. I was going to go on another walk early Friday morning, but never really got around to it.
- X Files. Yes, I watched the end of season 8 and the beginning of season 9 without my friends. Here's a ratio that makes it seem less bad though. New X Files episodes viewed during spring break last year/this year. 43:7. How can Linden and Liz be disappointed in me?

Here ends this beast of a post. If you read this, you've just read three Microsoft Word-pages of text. Congratulations. Hasn't this been a wonderful way to spend your time?

14 February 2007

Unburglar / Face Hat

My friend Jenny commissioned this ski mask/hat a couple of weeks ago, when it was really cold here in Oberlin. She wanted a hat that would cover her face, but not make her look like she was about to rob a bank (hence the pretty colors). Since the college is closed today (SNOW!), I'm finally getting around to posting the pattern.

Since it leaves very little of your face exposed to the air, and it's made of wool, it is an extremely warm hat. The neck part is long enough that it may reduce the need for a scarf. If you or someone you know is looking for reasons not to wear scarves, that is. I'd wear a one anyway.

It should fit any reasonably sized adult head, as it's worked entirely in a 1x1 rib. My head is slightly larger than average (somewhere a bit over 23"), and it fit me just fine.

Oh, and thanks to these two patterns for their inspiration/framework:
http://pearlofcivilization.net/
http://www.earthheartdesigns.com/






Ski Mask

Materials:
- size US 7 – 16” circular needle
- size US 7 – dpns
- Araucania Nature Wool (100% wool, 100g/220m) color 50 (1 skein)
- Ella Rae Classic (100% wool, 100g/200m) color 10 (1 skein)
- stitch marker
- yarn needle
- cable needle (optional, see notes on decreasing)

Gauge:
5 ribs (10 sts) = 4 cm
9 rows = 4 cm

*Note on decreasing(abbreviated ‘DEC’):
Since this whole hat is ribbed, the decreases come in pairs. There are two ways of doing this.
With a cable needle:
- sl 1 st to right needle
- sl 1 st to cable needle, hold at back of work
- sl 1 st from right needle back to left, k2tog
- sl st from cable needle back to left needle, p2tog

Without a cable needle:
I’ll employ a diagram. Here are 4 sts:
D C B A -
D and B are purl sts, C and A are knit, and the dash is where you are (before you decrease).
1. sl A to right needle
2. insert tip of right needle into C
3. sl B and C off left needle (C is now on rh needle)
4. with left needle, pick up B
5. put C and A back on left needle
Now it looks like this
D B C A -
Finally, k2tog, p2tog.


Pattern
Neck:
- With 2 strands of one color, CO 102 sts, pm
- K in k1p1 rib for 10 rnds
- work rib for 46 sts, DEC, work rib for 48 sts, DEC (98 sts)
- work rib for 2 rnds
- work rib for 44 sts, DEC, work rib for 46 sts, DEC (94 sts)
- work rib for 6 rnds
- work rib for 42 sts, DEC, work rib for 44 sts, DEC (90 sts)
- work rib for 3 rnds

Mask:
- work rib for 32 sts, wrap next st, turn
- work rib for 22 sts, wrap next st, turn
- work rib for 21 sts, wrap next st, turn
- work rib for 20 sts, wrap next st, turn
- work rib for 19 sts, wrap next st, turn
- work rib for 18 sts, wrap next st, turn
- work rib for 17 sts, wrap next st, turn
- work rib for 23 sts, turn
- work rib for 10 rnds
- work rib for 9 sts, p1f&b, work rib for 21 sts, p1f&b, work rib to end of rnd
- work rib for 2 rnds
- work rib for 31 sts, wrap next st, turn
- work rib for 18 sts, wrap next st, turn
- work rib for 19 sts, wrap next st, turn
- work rib for 20 sts, wrap next st, turn
- work rib for 21 sts, wrap next st, turn
- work rib for 22 sts, wrap next st, turn
- work rib for 23 sts, wrap next st, turn
- work rib for 24 sts, wrap next st, turn
- work rib for 25 sts, wrap next st, turn
- work rib for 26 sts, wrap next st, turn
- work rib for 29 sts, turn
- work rib for 32 sts, turn
- work rib for 2 rnds
- work rib for 8 sts, BO 26 sts in rib, work rib to end of rnd (64 sts)

switch colors! (still use two strands)

Top of Hat:
- remove, work rib for 8 sts, pm (this is the new beg/end of rnd)
- work rib for 7 rnds
- cast on 30 sts, work rib to end of rnd (94 sts)
- work rib for 4 rows
- work rib for 4 sts, DEC, work rib for 14 sts, DEC, work rib to end of rnd (90 sts)
- work rib for 17 rnds
- *work rib for 14 sts, DEC* around (80 sts)
- work rib for 2 rnds
- *work rib for 12 sts, DEC* around (70 sts)
- work rib for 1 rnd
- *work rib for 10 sts, DEC* around (60 sts)
- work rib for 1 rnd
- *work rib for 8 sts, DEC* around (50 sts)
- *work rib for 6 sts, DEC* around (40 sts)
- *work rib for 4 sts, DEC* around (30 sts)
- *work rib for 2 sts, DEC* around (20 sts)
- *DEC* around (10 sts)
- cut yarn, leaving a 15cm tail. using yarn needle, thread tail through rem sts, pull tight, weave in end on the inside.

Finishing:
weave in all other ends on the inside of the hat.

This is what Jenny would look like, in her new hat, if she was at a 90 degree angle to the camera.

And this is the little poem that I wrote, to remind Jenny of the laundering instructions (feel free to insert your own name, but try to keep the overall iambic pentameter). I apologize for the forced rhyme.
"Bethany Draeger knit me out of wool,
So hand wash me in water that is cool.
Some mild soap would be all right to try -
But make sure that you lay me flat to dry!"

08 December 2006

Biokniticry































Robots are pretty cool. Even this one, which is
stuffed with polyfill rather than mechanical
implements, is neat. I made it in the late spring/early summer of this year, but I can drag
my feet when it comes to posting. Here is the pattern:


Robot

Materials:
yarn – 85g grey
20g black
small amounts of red, yellow, blue

(I used 1 skein of Wool-ease in Grey Heather for the grey, and leftover Red Heart for the rest.)
needles – dpns – US sizes 4 & 6
stuffing
yarn needle
small stitch holder (be it metal or yarn in a contrasting color)
pipe cleaners – at least one – a dozen or so would be better
“knitting knobby” (i-cord making tool) (optional)

Body
using size 6 dpns and grey:
CO 20 sts
work 15 rows stockinette st
next row: CO 20 sts, p 40
next row: CO 20 sts, k 60
work 4 rows stockinette st

(begin button design, using intarsia)
row 1: k22 sts, knit design row, k22 sts
row 2: p22 sts, purl design row, p22 sts
alternate these rows until the end of the design, ending on a knit row

beginning w/ a purl row, work 24 rows stockinette st
next row: BO 20 sts, p 40
next row: BO 20 sts, k 20
beginning w/ a purl row, work 14 rows stockinette st
next row: BO 20 sts
cut yarn, leaving long tail for seaming

Legs (make 2)
using size 6 dpns and grey:
CO 7 sts
work 9 rows stockinette st
next row: CO 12 sts, p 19 (total sts – 19)
next row: CO 13 sts, k 32 (32 sts)
beginning w/ a purl row, work 21 rows stockinette st
next row: k13, m1, k7, m1, k12 (34 sts)
next row: purl
next row: k14, m1, k7, m1, k13 (36 sts)
next row: purl
next row: k15, m1, k7, m1, k14 (38 sts)
next row: purl
next row: k16, m1, k7, m1, k15 (40 sts)
next row: purl
next row: knit
next row: BO 16 sts, purl (24 sts)
next row: BO 17 sts, knit (7 sts)
work 13 rows stockinette st
next row: BO 7 sts
cut yarn, leaving long tail for seaming

Arms (make 2)
using size 4 dpns and black:
CO 18 sts
row 1: [k3, m1] rep (24 sts)
row 2: purl
row 3: knit
row 4: purl
row 5: [k4, m1] rep (30 sts)
row 6: purl
row 7: [k6, m1] rep (35 sts)
row 8: purl
row 9: knit
row 10: purl
row 11: [k5, k2tog] rep (30 sts)
row 12: purl
row 13: [k1, k2tog] rep (20 sts)
row 14: purl
row 15: [k2, k2tog] rep (15 sts)
row 16: purl
row 17: [k3, k2tog] rep (12 sts)
row 18: purl
row 19: [k3, m1] 3 times, k3 (15 sts)
row 20: purl
row 21: [k2, m1] 3 times, k3, m1, k2, [m1, k2] 2 times (21 sts)
row 22: purl
row 23: [k7, m1] rep (24 sts)
row 24: purl
row 25: [k2, k2tog] rep (18 sts)
row 26: purl
row 27: [k1, k2tog] rep (12 sts)
row 28: purl
row 29: [k2tog] rep (6 sts)
row 30: purl

switch to grey for claw, leaving a long black tail for seaming
row 31: k2, m1, k1 - slide rest of sts onto st holder (4 active sts)
row 32: purl
row 33: k1, m1, k2, m1, k1 (6 sts)
row 34: purl
row 35: knit
row 36: purl
row 37: knit
row 38: purl
row 39: knit
row 40: purl
row 41: knit
row 42: purl 3
fold 6 sts in half and graft them together
cut yarn, and sew sides of work to form a long skinny pocket

retrieve the 3 sts from the holder, and work the other half of the claw beginning at row 31

Head:
using size 6 and grey yarn
CO 15 sts
work 15 rows stockinette st
next row: CO 14 sts, purl row (29 sts)
next row: CO 14 sts, knit row (43 sts)
beginning w/ a purl row, work 10 rows stockinette st
next row: BO 14 sts, purl row (29 sts)
next row: BO 14 sts, knit row (15 sts)

(begin face design, using intarsia)
row 1: p2, p design row, p2
row 2: k2, k design row, k2
alternate these rows until end of face pattern, ending on a purl row

next row: knit
next row: BO 15 sts
cut yarn, leaving long tail for seaming

Antenna
using knitting knobby (or if you’ve got size 2 needles lying around)
CO 4 sts
work 10 rows of i-cord
BO 4 sts, cut yarn, leaving a short tail

if you don’t have those, on size 6 needles
CO 8 sts
work 1 row
BO 8 sts, cut yarn, leaving a short tail

Finishing
the Body
Use a yarn needle and the long tail to sew around the bottom and up the back of the body. If you wish, you may employ several pipe cleaners to form a boxlike skeleton to encourage a boxier shape. I measured and cut the pipe cleaners to twice the dimensions needed and twisted them together to make a stronger structure. It is good to fold the ends over about half an inch so the pointy wires don’t poke through the finished body. Insert the skeleton into the body. (I made a similar box for the head. I was going to make them for the legs – but the process is a bit tedious; I got lazy.) Stuff with polyfill.

the Head
Using the tails from the cast on and bind off rows, sew the corner seams on the head. Poke the two ends from the antennae (if you made i-cord, thread one tail through the center of the cord to the other end) through the top of the head, and tie it firmly in place. Insert a pipe cleaner skull if it so pleases you, and stuff with fiberfill. Sew the head to the flap on the top of the body, and sew the top of the body shut.

the Legs
Each leg is basically a long rectangular box with a triangular protrusion at the bottom to represent a foot. You knit them from the bottom (the sole) to the top. Using the cast on tail or another length of grey yarn, sew around the bottom of the sole, and up the back of each leg (the seam should be near the middle of the back of the leg). Stuff with polyfill, and attach it to the bottom of the body with the tail from the bind off. Repeat same procedure for the other leg. (Hint: look at the legs on my robot. That’s what we call “slightly overstuffed.” You may not like this look. I’m not crazy about it either.)

the Arms and Claws
So you’ve already made the skinny little pockets for the claws. This is where the pipe cleaners are not optional. Measure the pipe cleaner against a claw, bending and cutting it so that there’s a little extra length on both ends. Fold the extra length at each end over so the wire can’t easily poke through your knitting. Insert the pipe cleaner claw into the yarn claw, and use a grey yarn tail to close up any gaps in the middle of the bend. Repeat this on the other arm. Using the black tail near the claw, sew the seam up the length of each arm. Sew each arm to the body using the black yarn, so that the seam faces downward and the arm is about level with the chest buttons.

and Finally
Poke in the ends and show all your friends.







Face Design: (the o’s are grey, the x’s are black)
O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O
O O O O X X O O O X X O O O O
O O O O X X O O O X X O O O O
O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O
O O O O X X X X X X X O O O O
O O O X O X O X O X O X O O O
O O O X O X O X O X O X O O O
O O O X X X X X X X X X O O O
O O O X O X O X O X O X O O O
O O X O O X O X O X O O X O O
O O X X X X X X X X X X X O O
O O O O O O O O O O O O O O O


Chest Buttons: (same color scheme as head, r’s = red, b’s = blue, y’s = yellow)
X X X X X X X X X X X X X X X X
X O O O O O O O O O O O O O O X
X O R R O R R O O Y O Y O Y O X
X O R R O R R O O O O O O O O X
X O O O O O O O O Y O Y O Y O X
X O B B B B B O O O O O O O O X
X O B B B B B O O Y O Y O Y O X
X O O O O O O O O O O O O O O X
X X X X X X X X X X X X X X X X

17 September 2006

100% Red Heart! (I feel like a slut.)

i said that i would post the robot pattern. lo siento. next time, for real.

but now, there are much more important issues to be addressed. first of all, the bitchin' mittens are done! (mondrian style.) yeah, that's right, we used 'el cheapo' yarn, but try affording six colors of wool for some experimental mittens on a college-level budget. it ain't merino, but red heart has its (one) merit. behold the supreme gloriousness of these babies:


i'm going to shy away from more than two colors at once for several months. that got a little too complex at times. but oh, are they magnificent.

the rexlace belt is completed as well... though i didn't finish it in time to melt the ends in with a butane lighter before i left home. my roommate (linden, the exploding rainbow) knit a belt using a double strand of rexlace and yarn - that might work better, just so's you all know.

i'm currently working on a hat with waves, using SIX double pointed needles - not so portable, so it's coming along slowly. my other big project at the moment are the penguins that my aunt Deb designed and gave me yarn for. after that, we start working on the halloween costume.

-aside from knitting-
things are going well here in oberlin. the semester is underway, and i'm putting off work until Sunday, as usual. last night some friends and I went to see the Twins play the Indians at Jacob's Field. we (the Twins, of course) lost, but only due to a throwing error. i heard a newscaster say something about 'in baseball - a big win for the Indians last night'. not quite. there were a couple of drunken guys behind us for a while (i hate to use the phrase 'white trash', but it fits) who had been getting on my nerves for several innings. (i'm not into consistently taunting the opponents' left fielders), and one of them actually caught a ball that Gutierrez threw up into the stands. even in his lowered state of character, he gave it to a kid. i guess Anne Frank was right about people. after the game, there was an overstimulating display of fireworks set to music. couldn't hear half of the musical cues, but there were some neat explosions.

this morning, Linden and i took the Lorain County Transit into Elyria and spent enormous amounts of money at craft stores. CLEARANCE YARN! i'm getting better about making yarn purchases with patterns in mind, but i'm still going on a yarn diet for the rest of the semester. (that means no more buying yarn. which i'm totally capable of. totally.

of course, the evening ended with X Files! Gender Bender and Our Town, both wonderful cult-centered episodes. Gender Bender was especially awesome, because one of the actors in it (Nick Lea) shows up later in the series as a recurring character (Alex Krycek). this was the first time i've seen Gender Bender after knowing this information, so it was a pretty enjoyable viewing. i won't bother you with talk of the weekend's original X Files plans, not today. instead, i'll feed you some more iTunes. song (album) - artist format, as always.

the monkees theme (the monkees) - the monkees
the prisoner (clash on broadway) - the clash
it don't mean a thing (if it ain't got that swing) (the great summit) - louis armstrong & duke ellington
a valjean arrested/a valjean forgiven (les miserables) - orginal london cast
girlfriend is better (stop making sense) - the talking heads
wonderful world (the soul story) - sam cooke
summertime (my favorite things) - john coltrane
moonlight serenade (pirates of the caribbean) - klaus badelt
drop dead gorgeous (just push play) - aerosmith
local road (sound theology) - jonathan rundman


--
grace and peace.